...
Step 2: Selects submenus: Device Drivers > Multimedia support > Media ancillary drivers > Camera sensor devices
...
Step 3: Select Sony IMX219 sensor support and pressing <Y> includes. And then save and exit.
...
A Raspberry Pi Camera Module 2 is connected to MIPI-CSI RX4 port on C3V-W board. It’s shown below.
...
2.5. Check
After the burning is completed, start the board. The probing logs for MIPI-CSI RX and VIN drivers can be found. It’s as follows. The video device video0 has been successfully registered.
...
Step 3: Set ‘Dimension (px)’ to 1920 x 1080
...