Page Comparison

Drivers

Folders or files

 Feature descriptions

8-bit NAND

mtd/nand/raw/sp_paranand/

1. Supports mtd framework.

2. Supports read and write standard 2k/4k/8k ECC sectors.

3. Supports read and write 1K60 ECC sectors.

4. Supports block and chip erase.

Clock

clk/sunplus/

1. Supports common clock framework (CCF).

2. Supports clock functions for all devices.

eMMC

mmc/sp_mmc*

1. Supports MMC framework.

2. Supports read and write User Data Area.

3. Supports read and write RPMB partition.

4. Supports DMA mode.

Ethernet

net/designware.*

1. Supports 802.3 packets transactions.

2. Supports 100M and 1000M speeds.

3. Supports RGMII and RMII interfaces.

I2C

i2c/designware_i2c*

1. Supports I2C master mode access.

2. Supports 100kHz and 400kHz speeds.

OTP

soc/sunplus/

1. Supports write and read OTP.

2. Supports rotp and wotp commands.

Reset

reset/reset-sunplus.c

1. Supports reset functions for all devices.

Pinctrl

pinctrl/sunplus/

1. Supports generic helper bindings.

2. Supports pin-mux of all devices.

3. Supports all GPIO pins.

SD card

mmc/sp_sd*

1. Supports MMC framework.

2. Supports read and write operations.

3. Supports DMA mode.

SPI

spi/designware_spi.c

1. Supports SPI master mode access.

2. Supports set clock frequency in dts.

3. Supports mode 0, 1, 2 and 3.

SPI-NAND

mtd/nand/raw/sp_*

1. Supports mtd framework.

2. Supports read and write standard 2k ECC sectors for 1 or 2 planes.

3. Supports read and write standard 4k ECC sectors for 1 plane only.

4. Supports read and write 1K60 ECC sectors..

5. Supports block and chip erase.

6. Supports 4-bit operations.

7. Supports set clock frequency in dts.

SPI-NOR

mtd/spi/spi-nor-ids.c

spi/sp_spi_nor.c

1. Supports mtd framework.

2. Supports read and write operations.

3. Supports block and chip erase.

4. Supports set clock frequency in dts.

UART

serial/serial_sunplus.c

1. Supports U-Boot console at UART0.

2. Baud rate is set by i-boot.

USB2.0 EHCI

usb/host/ehci-sunplus.c

1. Supports high-speed read and write operations.

USB2.0 OHCI

usb/host/ohci-sunplus.c

1. Supports full-speed read and write operations.

USB2.0 UDC

usb/gadget/sp_udc.c

1. Supports USB devices (gadgets).

USB3.0 DRD

usb/host/xhci-spdwc3.c

usb/gadget/spdwc3_udc.c
phy/phy-sunplus-dwc3.c

1. Supports super-speed, high-speed and full-speed access.

2. Supports host and device modes.

3. Supports USB type C receptacle.

Video

video/sunplus/sp7350/disp/

1. Supports U-Boot video console.