...
Type | Folders | Files | Descriptions |
dts | boot/dts/sunplus/ | sp7350-ev.dts | For Evaluation board |
sp7350-dm.dts | For Demo board | ||
defconfig files | configs/ | sp7350_emmc_dm_defconfig | for Demo board, eMMC boot |
sp7350_sdcard_dm_defconfig | for Demo board, SD card boot | ||
sp7350_emmc_ev_defconfig | for EVB, eMMC boot | ||
sp7350_sdcard_ev_defconfig | for EVB, SD card boot | ||
sp7350_nand_ev_defconfig | for EVB, SPI-NAND flash boot | ||
sp7350_pnand_ev_defconfig | for EVB, 8-bit NAND flash boot | ||
Kconfig | ./ | Kconfig.platforms | for SP7350 platform |
Note that U-Boot and Linux share device-tree source files. For usage guidance, please refer to:
https://sunplus.atlassian.net/wiki/x/HwB8dg
Log of Linux
Code Block |
---|
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050] [ 0.000000] Linux version 5.10.201 (wellslu@scdiu3) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 9.2.1 20191025, GNU ld (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209) #1 SMP Thu Mar 7 11:48:47 CST 2024 [ 0.000000] Machine model: Sunplus SP7350 EVB [ 0.000000] earlycon: sunplus_uart0 at MMIO 0x00000000f8801900 (options '115200n8') [ 0.000000] printk: bootconsole [sunplus_uart0] enabled [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000000100000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node rproc0@100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000004f400000, size 200 MiB [ 0.000000] OF: reserved mem: initialized node mipicsirx@4f400000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000005be00000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vdev0buffer@5be00000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000005bf00000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vdev0vring0@5bf00000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000005bf10000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vdev0vring1@5bf10000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000005bf20000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vdev0_reserve@5bf20000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000005c000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node disp_reserve@5c000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000080000000, size 384 MiB [ 0.000000] OF: reserved mem: initialized node vcodec@80000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000fa240000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node cm4runaddr@fa240000, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x00000000efffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x00000000000fffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000004fffff] [ 0.000000] node 0: [mem 0x0000000000500000-0x000000005bdfffff] [ 0.000000] node 0: [mem 0x000000005be00000-0x000000005bffffff] [ 0.000000] node 0: [mem 0x000000005c000000-0x000000005fffffff] [ 0.000000] node 0: [mem 0x0000000060000000-0x0000000097ffffff] [ 0.000000] node 0: [mem 0x0000000098000000-0x00000000efffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000efffffff] [ 0.000000] cma: Reserved 16 MiB at 0x00000000ea000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 31 pages/cpu s86168 r8192 d32616 u126976 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 967680 [ 0.000000] Kernel command line: console=ttyS0,115200 earlycon root=/dev/mmcblk0p8 rw rootwait [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 2616828K/3932160K available (13310K kernel code, 3980K rwdata, 5440K rodata, 3200K init, 544K bss, 1028612K reserved, 286720K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] sp-clkc init [ 0.000000] PLLA 147456000 [ 0.000000] PLLC 1500000000 [ 0.000000] PLLL3 1200000000 [ 0.000000] PLLD 800000000 [ 0.000000] PLLH 2075000000 [ 0.000000] PLLN 500000000 [ 0.000000] PLLS 2000000000 [ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns [ 0.000003] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns [ 0.008289] Console: colour dummy device 80x25 [ 0.012687] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=25000) [ 0.022989] pid_max: default: 32768 minimum: 301 [ 0.027705] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.035069] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.043915] rcu: Hierarchical SRCU implementation. [ 0.049227] smp: Bringing up secondary CPUs ... I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot [ 0.061830] Detected VIPT I-cache on CPU1 [ 0.061872] CPU1: Booted secondary processor 0x0000000100 [0x412fd050] [ 0.070038] Detected VIPT I-cache on CPU2 [ 0.070063] CPU2: Booted secondary processor 0x0000000200 [0x412fd050] [ 0.078202] Detected VIPT I-cache on CPU3 [ 0.078224] CPU3: Booted secondary processor 0x0000000300 [0x412fd050] [ 0.078277] smp: Brought up 1 node, 4 CPUs [ 0.114049] SMP: Total of 4 processors activated. [ 0.118771] CPU features: detected: Privileged Access Never [ 0.124366] CPU features: detected: LSE atomic instructions [ 0.129963] CPU features: detected: User Access Override [ 0.135297] CPU features: detected: 32-bit EL0 Support [ 0.140455] CPU features: detected: Common not Private translations [ 0.146752] CPU features: detected: RAS Extension Support [ 0.152173] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.160829] CPU features: detected: CRC32 instructions [ 0.165988] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.193601] CPU: All CPU(s) started at EL2 [ 0.197658] alternatives: patching kernel code [ 0.203463] devtmpfs: initialized [ 0.212786] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.222512] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.235348] pinctrl core: initialized pinctrl subsystem [ 0.241110] NET: Registered protocol family 16 [ 0.246544] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.253666] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.261552] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.269479] audit: initializing netlink subsys (disabled) [ 0.274952] audit: type=2000 audit(0.116:1): state=initialized audit_enabled=0 res=1 [ 0.275265] thermal_sys: Registered thermal governor 'step_wise' [ 0.282797] cpuidle: using governor menu [ 0.292822] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.299620] ASID allocator initialised with 65536 entries [ 0.313157] SP7350 PinCtl by Sunplus Tech.(C) 2023 [ 0.321268] iommu: Default domain type: Translated [ 0.331049] SCSI subsystem initialized [ 0.334826] usbcore: registered new interface driver usbfs [ 0.340279] usbcore: registered new interface driver hub [ 0.345608] usbcore: registered new device driver usb [ 0.351373] mc: Linux media interface: v0.10 [ 0.355598] videodev: Linux video capture interface: v2.00 [ 0.361102] pps_core: LinuxPPS API ver. 1 registered [ 0.366074] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.375260] PTP clock support registered [ 0.379401] sunplus,ocotp f8802380.otp: by Sunplus (C) 2020 [ 0.385009] Advanced Linux Sound Architecture Driver Initialized. [ 0.391296] Bluetooth: Core ver 2.22 [ 0.394819] NET: Registered protocol family 31 [ 0.399264] Bluetooth: HCI device and connection manager initialized [ 0.405650] Bluetooth: HCI socket layer initialized [ 0.410545] Bluetooth: L2CAP socket layer initialized [ 0.415620] Bluetooth: SCO socket layer initialized [ 0.420745] clocksource: Switched to clocksource arch_sys_counter [ 0.758914] NET: Registered protocol family 2 [ 0.763366] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.772048] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.780572] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.788642] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.796230] TCP: Hash tables configured (established 32768 bind 32768) [ 0.802790] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.809489] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.816720] NET: Registered protocol family 1 [ 0.821307] RPC: Registered named UNIX socket transport module. [ 0.827195] RPC: Registered udp transport module. [ 0.831901] RPC: Registered tcp transport module. [ 0.836621] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.843997] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available [ 0.852914] Initialise system trusted keyrings [ 0.857397] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.865806] zbud: loaded [ 0.869227] NFS: Registering the id_resolver key type [ 0.874241] Key type id_resolver registered [ 0.878420] Key type id_legacy registered [ 0.882825] Key type cifs.idmap registered [ 0.886938] fuse: init (API version 7.32) [ 0.919931] Key type asymmetric registered [ 0.923967] Asymmetric key parser 'x509' registered [ 0.928877] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.936296] io scheduler mq-deadline registered [ 0.940842] io scheduler kyber registered [ 0.945240] usb 2.0 phy registered [ 0.948796] fbdev: sp_fbinfo not present [ 0.950122] dw_axi_dmac_platform f80fc000.dma-controller: DesignWare AXI DMA Controller, 16 channels [ 0.963521] ttyS f8801900.serial: sp_uart0's Rx is in PIO mode. [ 0.969413] ttyS f8801900.serial: sp_uart0's Tx is in PIO mode. [ 0.975356] f8801900.serial: ttyS0 at MMIO 0xf8801900 (irq = 18, base_baud = 1562500) is a sp_uart0 [ 0.984531] printk: console [ttyS0] enabled [ 0.984531] printk: console [ttyS0] enabled [ 0.992827] printk: bootconsole [sunplus_uart0] disabled [ 0.992827] printk: bootconsole [sunplus_uart0] disabled [ 1.007215] loop: module loaded [ 1.008261] stmmaceth f8103000.stmmac: no reset control found [ 1.008425] stmmaceth f8103000.stmmac: User ID: 0x10, Synopsys ID: 0x37 [ 1.011499] stmmaceth f8103000.stmmac: DWMAC1000 [ 1.016180] stmmaceth f8103000.stmmac: DMA HW capability register supported [ 1.023123] stmmaceth f8103000.stmmac: RX Checksum Offload Engine supported [ 1.030067] stmmaceth f8103000.stmmac: COE Type 2 [ 1.034754] stmmaceth f8103000.stmmac: TX Checksum insertion supported [ 1.041266] stmmaceth f8103000.stmmac: Wake-Up On Lan supported [ 1.047195] stmmaceth f8103000.stmmac: Normal descriptors [ 1.052550] stmmaceth f8103000.stmmac: Ring mode enabled [ 1.057843] stmmaceth f8103000.stmmac: Enable RX Mitigation via HW Watchdog Timer [ 1.065309] stmmaceth f8103000.stmmac: device MAC address f6:32:06:b4:3e:c7 [ 1.264024] register sunplus_usb_otg0_driver [ 1.269514] sunplus-usb-synopsys-u3phy f80bd000.uphy: sunplus_usb_synopsys_u3phy_probe [ 1.878990] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.879052] ehci-platform: EHCI generic platform driver [ 1.879600] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.885709] ohci-platform: OHCI generic platform driver [ 1.891124] register ehci0_hcd_sunplus_driver [ 1.895343] ehci0-sunplus f8102100.usb: Generic Platform EHCI Controller [ 1.901941] ehci0-sunplus f8102100.usb: new USB bus registered, assigned bus number 1 [ 1.909795] ehci0-sunplus f8102100.usb: irq 37, io mem 0xf8102100 [ 1.922742] ehci0-sunplus f8102100.usb: USB 2.0 started, EHCI 1.10 [ 1.923241] hub 1-0:1.0: USB hub found [ 1.925746] hub 1-0:1.0: 1 port detected [ 1.929907] register ohci0_hcd_sunplus_driver [ 1.934061] ohci0-sunplus f8102080.usb: Generic Platform OHCI Controller [ 1.940650] ohci0-sunplus f8102080.usb: new USB bus registered, assigned bus number 2 [ 1.948502] ohci0-sunplus f8102080.usb: irq 38, io mem 0xf8102080 [ 2.008111] hub 2-0:1.0: USB hub found [ 2.008170] hub 2-0:1.0: 1 port detected [ 2.008507] usbcore: registered new interface driver cdc_acm [ 2.010224] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 2.018242] usbcore: registered new interface driver usb-storage [ 2.024236] usbcore: registered new interface driver ch341 [ 2.029672] usbserial: USB Serial support registered for ch341-uart [ 2.035928] usbcore: registered new interface driver cp210x [ 2.041474] usbserial: USB Serial support registered for cp210x [ 2.047389] usbcore: registered new interface driver ftdi_sio [ 2.053105] usbserial: USB Serial support registered for FTDI USB Serial Device [ 2.060434] usbcore: registered new interface driver option [ 2.065951] usbserial: USB Serial support registered for GSM modem (1-port) [ 2.072953] usbcore: registered new interface driver pl2303 [ 2.078451] usbserial: USB Serial support registered for pl2303 [ 2.084438] sp_udc_probe start, port_num:0, ffffff8001b81000 [ 2.090351] mousedev: PS/2 mouse device common for all mice [ 2.097117] sp7350-rtc f8801180.rtc: registered as rtc0 [ 2.101045] sp7350-rtc f8801180.rtc: setting system clock to 1970-01-03T23:04:09 UTC (255849) [ 2.109254] [RTC] Info: sp7350-rtc loaded [ 2.113307] i2c /dev entries driver [ 2.116913] sp7350_display_probe: disp probe ... [ 2.121323] sp7350_display_probe: disp probe 4 irq [ 2.126362] connect_dev_name LT8912B-HDMI (1920x1080) [ 2.131140] sp7350_display_probe: disp probe set layer blending [ 2.137481] sp7350_display_probe: disp probe done [ 2.189859] sp7350_disp_lt8912_probe [ 2.190076] hantro_dec f8168000.hantro_vc8000d: dec/pp kernel module. [ 2.190134] hantro_dec f8168000.hantro_vc8000d: major:243 minor:0 [ 2.194912] hantro_dec f8168000.hantro_vc8000d: Core 0 HW ID=0x6e645000 [ 2.201429] hantro_dec f8168000.hantro_vc8000d: Supported HW found at 0xf8168000 [ 2.203752] usb 1-1: new high-speed USB device number 2 using ehci0-sunplus [ 2.208812] hantro_dec f8168000.hantro_vc8000d: clock enabled [ 2.221480] hantro_dec f8168000.hantro_vc8000d: reset okay [ 2.226966] hantro_dec f8168000.hantro_vc8000d: core[0] has H264 [ 2.232934] hantro_dec f8168000.hantro_vc8000d: core[0] has JPEG [ 2.238927] hantro_dec f8168000.hantro_vc8000d: core[0] has PP [ 2.244738] hantro_dec f8168000.hantro_vc8000d: reset hardware [ 2.250678] hantro_enc f80ff000.hantro_vc8000e: major:242 minor:0 [ 2.256705] hantro_enc f80ff000.hantro_vc8000e: mem iobaseaddr = f80ff000h [ 2.263578] hantro_enc f80ff000.hantro_vc8000e: mem mapping = ffffffc011ccd000h [ 2.270953] hantro_enc f80ff000.hantro_vc8000e: mem iosize = fffh [ 2.277119] hantro_enc f80ff000.hantro_vc8000e: clock enabled [ 2.282847] hantro_enc f80ff000.hantro_vc8000e: reset okay [ 2.288313] hantro_enc f80ff000.hantro_vc8000e: HW at base <0xf80ff000> with ID <0x6e655000> [ 2.297035] memalloc_d video_codec_dmem: major:241 minor:0 [ 2.302321] memalloc_d video_codec_dmem: module init [ 2.307150] memalloc_d video_codec_dmem: SW build 1000 [ 2.312356] memalloc_d video_codec_dmem: linear memory base = 0x74000000 [ 2.319125] memalloc_d video_codec_dmem: linear memory size = 64 MB [ 2.325483] memalloc_d video_codec_dmem: Total size 64 MB; 4096 chunks of size 16384 [ 2.333333] memalloc_e video_codec_emem: allocation method: DYNAMIC [ 2.339443] memalloc_e video_codec_emem: major:240 minor:0 [ 2.344995] memalloc_e video_codec_emem: SW build 1000 [ 2.346914] hub 1-1:1.0: USB hub found [ 2.350119] memalloc_e video_codec_emem: linear memory base = 0x60000000 [ 2.354344] hub 1-1:1.0: 4 ports detected [ 2.360619] memalloc_e video_codec_emem: linear memory size = 327680 MB [ 2.371297] memalloc_e video_codec_emem: chunk size = 4 KB, chunks = 1 configured [ 2.378865] hantro_codec video_codec: Video codec clock enabled [ 2.384666] hantro_codec video_codec: Video codec reset okay [ 2.390385] usbcore: registered new interface driver uvcvideo [ 2.396033] USB Video Class driver (1.1.1) [ 2.402960] Bluetooth: HCI UART driver ver 2.3 [ 2.404542] Bluetooth: HCI UART protocol H4 registered [ 2.438515] spsdc f8003e80.mmc: Got CD GPIO [ 2.524234] mmc0: new DDR MMC card at address 0001 [ 2.525137] mmcblk0: mmc0:0001 88A398 7.28 GiB [ 2.525488] mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB [ 2.528380] mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB [ 2.534278] mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (239:0) [ 2.537715] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 2.549621] usbcore: registered new interface driver usbhid [ 2.550121] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 [ 2.553439] usbhid: USB HID core driver [ 2.561800] remoteproc remoteproc0: f800817c.remoteproc is available [ 2.568751] optee: probing for conduit method. [ 2.572387] optee: revision 3.13 (150e2ba5) [ 2.572667] optee: initialized driver [ 2.580362] usbcore: registered new interface driver snd-usb-audio [ 2.586780] sunplus-audio f8800480.audio: sunplus_audio_probe [ 2.592170] sunplus-audio f8800480.audio: sunplus_i2s_register [ 2.598069] sunplus-audio f8800480.audio: sunplus_tdm_register [ 2.604153] aud-codec aud-codec: aud_codec_probe [ 2.604275] mmc2: error -110 whilst initialising SDIO card [ 2.614927] snd_spsoc_audio_init , create soc_card [ 2.618946] soc-audio soc-audio: ASoC: machine sp-aud should use snd_soc_register_card() [ 2.627279] debugfs: Directory 'f8800480.audio' with parent 'sp-aud' already present! [ 2.635850] NET: Registered protocol family 10 [ 2.636279] mmc1: new ultra high speed SDR25 SDHC card at address 0001 [ 2.639767] usb 1-1.1: new low-speed USB device number 3 using ehci0-sunplus [ 2.639976] Segment Routing with IPv6 [ 2.640019] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.640376] NET: Registered protocol family 17 [ 2.640504] Bluetooth: RFCOMM TTY layer initialized [ 2.640521] Bluetooth: RFCOMM socket layer initialized [ 2.640536] Bluetooth: RFCOMM ver 1.11 [ 2.640545] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.640546] Bluetooth: BNEP filters: protocol multicast [ 2.640553] Bluetooth: BNEP socket layer initialized [ 2.640556] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.640561] Bluetooth: HIDP socket layer initialized [ 2.640637] Key type dns_resolver registered [ 2.640650] Key type ceph registered [ 2.640805] libceph: loaded (mon/osd proto 15/24) [ 2.641128] registered taskstats version 1 [ 2.641135] Loading compiled-in X.509 certificates [ 2.646350] mmcblk1: mmc1:0001 SD16G 14.5 GiB [ 2.649199] fbdev: fb create 1920x1080, cmod 8(RGB565) [ 2.649217] sp7350-fb fb_disp_device: assigned reserved memory node disp_reserve@5c000000 [ 2.742148] input: HID 04f3:0103 as /devices/platform/f8102100.usb/usb1/1-1/1-1.1/1-1.1:1.0/0003:04F3:0103.0001/input/input0 [ 2.747327] mmcblk1: p1 [ 2.757082] hid-generic 0003:04F3:0103.0001: input: USB HID v1.11 Keyboard [HID 04f3:0103] on usb-f8102100.usb-1.1/input0 [ 2.770436] fbcon: Deferring console take-over [ 2.774349] input: HID 04f3:0103 Consumer Control as /devices/platform/f8102100.usb/usb1/1-1/1-1.1/1-1.1:1.1/0003:04F3:0103.0002/input/input1 [ 2.774860] fbdev: fb res 1920x1080, size 8298496 + 1024 [ 2.787709] input: HID 04f3:0103 System Control as /devices/platform/f8102100.usb/usb1/1-1/1-1.1/1-1.1:1.1/0003:04F3:0103.0002/input/input2 [ 2.805402] hid-generic 0003:04F3:0103.0002: input: USB HID v1.11 Device [HID 04f3:0103] on usb-f8102100.usb-1.1/input1 [ 2.880797] usb 1-1.3: new low-speed USB device number 4 using ehci0-sunplus [ 2.969691] input: Logitech USB Optical Mouse as /devices/platform/f8102100.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C06A.0003/input/input3 [ 2.971298] hid-generic 0003:046D:C06A.0003: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-f8102100.usb-1.3/input0 [ 3.179158] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.180837] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.182282] [dhd] _dhd_module_init: in Dongle Host Driver, version 101.10.361.36 (wlan=r892223-20231114-1) [ 3.182282] drivers/net/wireless/bcmdhd compiled on Mar 7 2024 at 11:50:05 [ 3.182282] [ 3.200282] [dhd] STATIC-MSG) dhd_static_buf_init : 101.10.361.36 (wlan=r892223-20231107-1) [ 3.208640] [dhd] STATIC-MSG) dhd_init_wlan_mem : prealloc ok for index 0: 1102848(1077K) [ 3.216838] [dhd] no wifi platform data, skip [ 3.221111] [dhd] dhd_wifi_platform_load: Enter [ 3.225624] [dhd] DHD wifi platform data is required for Android build [ 3.232134] [dhd] DHD registering bus directly [ 3.236560] [dhd] bcmsdh_register: register client driver [ 3.241970] [dhd] _dhd_module_init: Exit err=0 [ 3.246371] ALSA device list: [ 3.249321] #0: Q645/Q654, Sunplus Technology Inc. [ 3.254388] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 3.262871] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 3.292263] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 3.292354] VFS: Mounted root (ext4 filesystem) on device 259:0. [ 3.295458] devtmpfs: mounted [ 3.299212] Freeing unused kernel memory: 3200K [ 3.302693] Run /sbin/init as init process /etc/init.d/rcS starts... Mounting other filesystems ... rc.extra [bg] ******* resize2fs /dev/mmcblk0p8 **************** extra done resize2fs 1.46.2 (28-Feb-2021) [ 3.601208] EXT4-fs (mmcblk0p8): resizing filesystem from 142490 to 1899447 blocks Filesystem at /dev/mmcblk0p8 is mounted on /; on-line resizing required old_desc_blocks = 1, new_desc_blocks = 1 [ 3.735549] EXT4-fs (mmcblk0p8): resized filesystem to 1899447 The filesystem on /dev/mmcblk0p8 is now 1899447 (4k) blocks long. [ 3.762893] remoteproc remoteproc0: powering up f800817c.remoteproc [ 3.766193] remoteproc remoteproc0: Booting fw image firmware, size 244296 [ 3.769557] virtio_rpmsg_bus virtio0: rpmsg host is online [ 3.773861] remoteproc0#vdev0buffer: registered virtio0 (type 7) [ 3.779871] remoteproc remoteproc0: remote processor f800817c.remoteproc is now up [ 3.797740] virtio_rpmsg_bus virtio0: creating channel rpmsg-tty-raw addr 0x0 [ 3.798065] virtio_rpmsg_bus virtio0: creating channel rpmsg-tty-raw addr 0x1 [ 3.801847] virtio_rpmsg_bus virtio0: creating channel rpmsg-tty-raw addr 0x2 Boot CM4 firmware by remoteproc End of /etc/init.d/rcS login[148]: root login on 'console' ~ # [ 3.893937] fbcon: Taking over console [ 3.895107] Console: switching to colour frame buffer device 240x67 ~ # df -hT Filesystem Type Size Used Available Use% Mounted on /dev/root ext4 7.0G 342.9M 6.4G 5% / devtmpfs devtmpfs 1.2G 0 1.2G 0% /dev tmpfs tmpfs 1.4G 0 1.4G 0% /dev/shm tmpfs tmpfs 1.4G 0 1.4G 0% /tmp ~ # |
...