...
| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Kernel Setup
Enter the kernel configuration by running the following command in the top directory of project.
...
Execute the make command to build the Linux image.
Create a backing storage file
The backing storage file must be prepared before the gadget uses it.
...
| Code Block |
|---|
# mkfs.fat /backing_file_u2 mkfs.fat 4.1 (2017-01-24) # mkfs.fat /backing_file_u3 mkfs.fat 4.1 (2017-01-24) |
ConfigFS
Configure mass storage gadget through configfs saved as a file named usb_mass_storage.
| Code Block |
|---|
#!/bin/bash
USB2_UMS_EN=on
USB3_UMS_EN=on
MODULES=/lib/modules/`uname -r`/kernel
LIBCOMPOSITE=/$MODULES/drivers/usb/gadget/libcomposite.ko
FUNCTION=/$MODULES/drivers/usb/gadget/function/usb_f_mass_storage.ko
#install the drivers
insmod $LIBCOMPOSITE
insmod $FUNCTION
#mount configfs
mkdir -p /sys/kernel/config
mount -t configfs none /sys/kernel/config
if [ $USB2_UMS_EN = on ]
then
UDC_NAME="f8102800.usb"
BACKING_FILE=/backing_file_u2
#create gadget
cd /sys/kernel/config/usb_gadget
mkdir g1
cd g1
echo "64" > bMaxPacketSize0
echo "0x200" > bcdUSB
#create configuration
mkdir -p configs/c.1
mkdir -p configs/c.1/strings/0x409
echo 120 > configs/c.1/MaxPower
mkdir strings/0x0409
echo "1234" > strings/0x0409/serialnumber
echo "Sunplus" > strings/0x0409/manufacturer
echo "SP7350 USB2.0 Mass Storage Gadget" > strings/0x0409/product
#create functions
mkdir functions/mass_storage.usb0
echo "$BACKING_FILE" > functions/mass_storage.usb0/lun.0/file
#link functions and configuration
ln -s functions/mass_storage.usb0 configs/c.1
#activate
echo $UDC_NAME > UDC
fi
if [ $USB3_UMS_EN = on ]
then
UDC_NAME="f80a1000.dwc3"
BACKING_FILE=/backing_file_u3
#create gadget
cd /sys/kernel/config/usb_gadget
if [ $USB2_UMS_EN = on ]
then
mkdir g2
cd g2
else
mkdir g1
cd g1
fi
echo "64" > bMaxPacketSize0
echo "0x300" > bcdUSB
#create configuration
mkdir configs/c.1
mkdir configs/c.1/strings/0x409
echo 120 > configs/c.1/MaxPower
mkdir strings/0x0409
echo "5678" > strings/0x0409/serialnumber
echo "Sunplus" > strings/0x0409/manufacturer
echo "SP7350 USB3.0 Mass Storage Gadget" > strings/0x0409/product
#create functions
mkdir functions/mass_storage.usb0
echo "$BACKING_FILE" > functions/mass_storage.usb0/lun.0/file
#link functions and configuration
ln -s functions/mass_storage.usb0 configs/c.1
#activate
echo $UDC_NAME > UDC
fi |
Implementation
After updating the image to the SP7350 platform, booting the system and copying backing_file_u2 and backing_file_u3 to it, use sh usb_mass_storage command to configure USB 2.0 and USB 3.0 as mass storage devices.
...