Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

In this article, we will guide you through the process of downloading and compiling the SP7350 code. The source code for SP7350 is automatically updated on both GitHub and Gitee every day, ensuring users have access to the latest developments.

...

Once you have completed the configuration selections in the menu, the system will start configuring the building environment. This process may take tens seconds or even a few minutes, depending on your computer's performance. Please wait patiently for the configuration process to conclude.

Please note that the system takes additional time to complete its initial run during the configuration process, as it requires the download of the toolchain.

Configure X-Boot Features (optional)

...

After make command completes, it will display information similar to the following screenshot:image-20240424-051233.pngImage Removed

...

The screenshot provides details about two partitions created in the SD card image. The first partition spans from sector 2,048 to sector 526,335, with a size of 256 MB and a W95 FAT file system. The second partition extends from sector 526,336 to sector 1,627,959, with a size of 537.9 MB and a Linux (ext4) file system.

...

https://sunplus.atlassian.net/wiki/spaces/C3/pages/1994621039/A+Guide+to+In-system+Programming+Flash+Devices+on+the+SP7350+Platforms#AppendixDevices#Appendix

For example, if you are using SP7350 Evaluation Board, please set boot-selection switch SW2 to all OFF (1111) and SW3 to OFF-OFF-ON-ON (1100) for booting from SD card.

...

A Guide to In-system Programming Flash Devices on the SP7350 Platforms

Log of Booting from SD Card

...