...
| Code Block |
|---|
U-Boot 2024.07-gbab521bc6-dirtyg2a4e728eb (Sep 1920 2024 - 1009:0135:0419 +0800) CONFIG_SYS_CACHELINE_SIZE: 64 Model: Sunplus SP7350 EVB DRAM: 3.8 GiB (effective 4 GiB) PLLA : 147456000 Hz PLLC : 1500000000 Hz PLLL3 : 1200000000 Hz PLLD : 800000000 Hz PLLH : 2150000000 Hz PLLN : 500000000 Hz PLLS : 2000000000 Hz reset: reset@f8800004 Core: 320331 devices, 1117 uclasses, devicetree: separate SPI: Manufacturer id = 0x00, Device id = 0x0000 MMC: emmc: 0, sd: 1 Loading Environment from MMC... OKReading Disp: probe from MMC(0)... Disp: init 1920x1080 settings Disp: lt8912b bridge not found Disp: probe done OK In: serial@f8801900 Out: serial@f8801900 Err: serial@f8801900 Net: Could not get PHY for stmmac@f8103000: addr 1 No ethernet found. eth0: stmmac@f8103000 starting USB... Bus usb@f8102100: ehci_sunplus_probe.204, dev_name:usb@f8102100,port_num:0 after write usbruncmd,usbcmd:80b01,retry_times:0 USB EHCI 1.10 Bus usb@f8102080: ohci_sunplus_probe.2151, dev_name:usb@f8102080,port_num:10 USB OHCI 1.0 Bus dwc3@f80a1000: Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@f8102100 for devices... 1 USB Device(s) found scanning bus usb@f8102080 for devices... 1 USB Device(s) found scanning bus dwc3@f80a1000 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 [scr] bootcmd started fa218008: 0000001f .... [scr] emmc boot MMC read: dev # 0, block # 8738, count 1 ... 1 blocks read: OK MMC read: dev # 0, block # 8738, count 1929718263 ... 1929718263 blocks read: OK unzip 10000000 2000000 Uncompressed size: 2728551222896648 = 0x1A058080x15D6008 booti 2000000 - ef8ec510ef901570 ## Flattened Device Tree blob at ef8ec510ef901570 Booting using the fdt blob at 0xef8ec510 ehci_usb_remove.214, dev_name:usb@f8102100,port_num:0 ohci_sunplus_remove.28, dev_name:usb@f8102080,port_num:10xef901570 Working FDT set to ef901570 Loading Device Tree to 00000000ef8d900000000000ee8d7000, end 00000000ef8e987f00000000ee8e881f ... OK Working FDT set to ee8d7000 Starting kernel ... |