This document demonstrates how to create an USB 2.0 / USB 3.0 ADB gadget on SP7350 platforms.
...
Please refer to https://sunplus.atlassian.net/wiki/x/1gB-dg to download the source code. Use the following command to set up the compilation environment. In “Select rootfs“, “5“ should be selected for Buildroot root file-system.
| Code Block |
|---|
# make config |
adbd utility for the
...
target
Use the following command to enter Buildroot Configuration and select submenus for the adbd utility for the target : Target Packages > System tools. Select [*] for “android-tools” (it selects “adbd” by default).
| Code Block |
|---|
# make bconfig |
kernel
...
Setup
Enter the kernel configuration by running the following command in the top directory of project.
...
| Code Block |
|---|
#!/bin/bash
# enable USB2 or USB3
ADB_EN=USB2
KERNEL_PATH=/lib/modules/`uname -r`/kernel
GADGET_PATH=$KERNEL_PATH/drivers/usb/gadget
FUNCTION_PATH=$GADGET_PATH/function
COMPOSITE=$GADGET_PATH/libcomposite.ko
U_FFS=$FUNCTION_PATH/usb_f_fs.ko
insmod $COMPOSITE
insmod $U_FFS
# disable debug message
echo 0 > /sys/module/sunplus_udc/parameters/dmsg
if [ ! -d /dev/pts ]
then
mkdir /dev/pts
mount -t devpts none /dev/pts
fi
if [ ! -d /sys/kernel/config ]
then
mkdir -p /sys/kernel/config
mount -t configfs none /sys/kernel/config
fi
cd /sys/kernel/config/usb_gadget
mkdir g_adb
cd g_adb
echo "0x1d6b" > idVendor
echo "0x0105" > idProduct
mkdir configs/c.1
mkdir functions/ffs.adb
mkdir strings/0x409
mkdir configs/c.1/strings/0x409
echo "20240807" > strings/0x409/serialnumber
echo "Sunplus" > strings/0x409/manufacturer
echo "FunctionFS gadget (adb)" > strings/0x409/product
echo "adb" > configs/c.1/strings/0x409/configuration
echo 120 > configs/c.1/MaxPower
mkdir -p functions/ffs.adb
ln -s functions/ffs.adb configs/c.1
mkdir -p /dev/usb-ffs/adb
mount -o uid=2000,gid=2000 -t functionfs adb /dev/usb-ffs/adb
adbd&
sleep 1
if [ $ADB_EN = USB2 ]
then
echo "f8102800.usb" > UDC
elseelif if [ $ADB_EN = USB3 ]
then
echo "f80a1000.dwc3" > UDC
fi |
...
After updating the image to the SP7350 platform , and booting the system, use sh setup_adb command to configure USB 2.0 or USB 3.0 as an adb device.
...