Source Code
...
When prompted during the code building process, select “[3] SP7350 MC Board.”
Refer to In-system Programming Flash Devices if you write image into eMMC device and boot from it.
Refer to the release details of the software package: Releases
Prebuilt Images
To create an SD card for booting SP7350 IO Boards, start by downloading the prebuilt image file, such as Ubuntu_Server_24_04_1_for_MCB_20241121.7z and unzip it. Once ready, write the image directly to the SD card using the dd command. For example:
| Code Block |
|---|
dd if=Ubuntu_Server_24_04_1_for_MCB_20241121.img of=/dev/sda bs=1M; sync |
Here, the SD card is accessed via a USB SD card reader and mounted at /dev/sda. Depending on your system, unmounting the SD card might be required after the writing process is complete.
| Code Block |
|---|
umount /dev/sda |
To boot from the SD card, set the boot switch to [1 1 0 0] as shown in the diagram below:
...
Insert the prepared SD card into the micro SD card socket, as illustrated in the figure below.
...
Finally, power on the system, which will automatically boot from the SD card.