Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Line 4: Model name is ‘Sunplus SP7350’SP7350 EVB’.

Line 5: The DRAM size is 3.8 GiB.

...

Line 12: PLLS (System PLL) is set to 2,000,000,000 Hz.

Line 1617: The U-Boot environment variable is successfully loaded.

Line 1718-2021: The display is successfully probed.

Line 2122-2324: Standard input, output and error are directed to the serial (UART0)

...

Line 47: Loading the Linux kernel image.

Line 48-4849: Unzipping the Linux kernel image.

Line 50-5857: Preparing to run Linux kernel.

Code Block
U-Boot 2024.07-gbab521bc6-dirtygc1f79898b (Sep 1926 2024 - 1018:0141:04 +0800)

CONFIG_SYS_CACHELINE_SIZE: 64
Model: Sunplus SP7350 EVB
DRAM:  3.8 GiB (effective 4 GiB)
PLLA            :  147456000 Hz
PLLC            : 1500000000 Hz
PLLL3           : 1200000000 Hz
PLLD            :  800000000 Hz
PLLH            : 2150000000 Hz
PLLN            :  500000000 Hz
PLLS            : 2000000000 Hz
reset: reset@f8800004
Core:  320338 devices, 1121 uclasses, devicetree: separate
SPI:   Manufacturer id = 0x00, Device id = 0x0000

MMC:   emmc: 0, sd: 1
Loading Environment from MMC... Reading from MMC(0)... OK
Disp: probe ... 
Disp: init 1920x1080 settings
Disp: init lt8912b bridge notic
found
Disp: probe done

In:    serial@f8801900usbkbd,serial
Out:   serial@f8801900vidconsole,serial
Err:   serial@f8801900vidconsole,serial
Net:   Could not get PHY for stmmac@f8103000: addr 1
No ethernet found.eth0: stmmac@f8103000

starting USB...
Bus usb@f8102100: ehci_sunplus_probe.204164, dev_name:usb@f8102100,port_num:0
after write usbruncmd,usbcmd:80b01,retry_times:0
USB EHCI 1.10
Bus usb@f8102080: ohci_sunplus_probe.2151, dev_name:usb@f8102080,port_num:1
USB OHCI 1.0
Bus dwc3@f80a1000: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@f8102100 for devices... 1 USB Device(s) found
scanning bus usb@f8102080 for devices... 1 USB Device(s) found
scanning bus dwc3@f80a1000 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0

[scr] bootcmd started
fa218008: 0000001f                               ....
[scr] emmc boot

MMC read: dev # 0, block # 8738, count 1 ... 1 blocks read: OK

MMC read: dev # 0, block # 8738, count 1929718262 ... 1929718262 blocks read: OK
unzip 10000000 2000000
Uncompressed size: 2728551222896648 = 0x1A058080x15D6008
booti 2000000 - ef8ec510ef8db4b0
## Flattened Device Tree blob at ef8ec510ef8db4b0
   Booting using the fdt blob at 0xef8db4b0
0xef8ec510
ehci_usb_remove.214, dev_name:usb@f8102100,port_num:0
ohci_sunplus_remove.28, dev_name:usb@f8102080,port_num:1Working FDT set to ef8db4b0
   Loading Device Tree to 00000000ef8d900000000000ee8b1000, end 00000000ef8e987f00000000ee8c28bb ... OK
Working FDT set to ee8b1000

Starting kernel ...