Fastboot is a versatile protocol designed for re-flashing partitions, including x-boot, u-boot, uImage, rootfs, and etc., of eMMC device on SP7350 devicesplatforms. This guide will walk you through the process of utilizing Minimal ADB and Fastboot, a handy Windows application, to harness the power of fastboot.
Table of Contents
| Table of Contents | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Fastboot
...
Over USB
Boot SP7350 platform from eMMC device
To initiate To use the fastboot process on SP7350 platform over USB interface, follow these steps after successfully booting from the eMMC device and enter command-line interface of U-Boot. Establish , please follow the following steps.
Activate the USB Download Gadget
To establish a connection between your SP7350 platform and a Windows computer using either a USB 2.0 cable (micro USB) or a USB 3.0 cable (type C) to configure it as a USB download gadget.for USB downloads, please use the following command in the U-Boot command-line interface to activate the USB download gadget:
If either the USB 2.0 or USB 3.0 download gadget driver is enabled, use the following command to activate the USB download gadget:
...
In scenarios where both USB 2.0 and USB 3.0 download gadget drivers are enabled simultaneously, distinguish between them using the following commands:
For USB 2.0 download gadget:
| Code Block |
|---|
=> fastboot usb 0 |
For USB 3.0 download gadget:
| Code Block |
|---|
=> fastboot usb 1 |
By executing these commands, you seamlessly enable the SP7350 platform to function as a USB download gadget, facilitating a smooth and efficient fastboot process.
Update USB
...
Download Gadget Driver in the Windows
...
Computer
Following the execution of the command in U-Boot and connecting the SP7350 platform to the Windows computer, you may observe that in the Device Manager, the USB is categorized under "Other devices" as "USB download gadget" in Windows. To update the driver, follow these steps:
Right click it, and choose “Update drivers->browse drivers”.
...
Choose “Browse my computer for driver software ->let me pick from a list of available drivers on my computer”.
...
Choose “Android Device”.
...
Choose Android ADB Interface and press “Yes” drivers”.
...
The driver is in the location of E:\Google android USB driver\usb_driver and it contains the files show below.
...
Choose the location with the driver for “Search for drivers in this location:” and press “Next”.
...
Choose “Show All Devices” and press “Next”.
...
Press “Have Disk…”.
...
Choose the location with the driver for “Copy manufacture’s files from:” and press “OK”.
...
Choose “Android ADB Interface” and press “Next” to install this driver.
...
Press “Yes”.
...
Press “Close”.
...
After the update, you will see SAMSUNG Android DevicePhone->Android ADB Interface in Device manager.
...
Install Minimal ADB and Fastboot on Windows
...
Computer
To install the “Minimal ADB and Fastboot” application on your Windows computer. Follow , please follow these steps:
Download the Application: Obtain the “Minimal ADB and Fastboot” application and install it on your Windows computer.
Installation Path: During installation, the application is typically placed in the directory "c:\Program Files (x86)\Minimal ADB Fastboot."
Organize Image Files: Place the necessary image files (xboot.img, u-boot.img, uImage, and rootfs.img) in the installation folder. This is crucial for efficiently reflashing partitions using subsequent commands.Reflashing Partitions: To reflash partitions, open the Command Prompt on your Windows computer and navigate to the installation directory. Use commands specific to your requirements.
...
Flash
...
Images
x-boot
...
Partition
The image file of xboot x-boot (xboot.img) is stored at eMMC boot partition 1 of eMMC device and its default target name is “mmc0boot0” as shown in > Device Drivers > Fastboot support of menuconfig of U-Boot.:
...
To update the x-boot image, execute the following command in the Windows Command Prompt:
...
Upon execution, the system will report the maximum download size as 117440512 117,440,512 bytes. Subsequently, the 'mmc0boot0' target, with a file size of 131KB, will be sent and successfully written, completing the process in approximately 0.032 seconds.
u-boot, kernel or rootfs
...
Partitions
The U-Boot command "mmc part" can be applied to retrieve the partition names within the eMMC's User Data Area Partition (GUID).:
| Code Block |
|---|
=> mmc part
Partition Map for MMC device 0 -- Partition Type: EFI
Part Start LBA End LBA Name
Attributes
Type GUID
Partition GUID
1 0x00000022 0x00000821 "uboot1"
attrs: 0x0000000000000000
type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
guid: 292c805a-cb56-41bf-97f2-773a25608b40
2 0x00000822 0x00001021 "uboot2"
attrs: 0x0000000000000000
type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
guid: 635a1f52-8abf-4f93-8d70-17fd82e1c570
3 0x00001022 0x00001821 "fip"
attrs: 0x0000000000000000
type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
guid: b4608adb-3ac4-4964-9de5-5bcd8db8e38d
4 0x00001822 0x00001c21 "env"
attrs: 0x0000000000000000
type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
guid: dbaab200-cfe5-45e8-99d0-e9d920a5a29d
5 0x00001c22 0x00002021 "env_redund"
attrs: 0x0000000000000000
type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
guid: 10b84778-f209-4a67-9008-4ffefee0fdf4
6 0x00002022 0x00002221 "dtb"
attrs: 0x0000000000000000
type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
guid: 127f33a4-ba05-4ab1-9c9e-ead8003b12ec
7 0x00002222 0x00012221 "kernel"
attrs: 0x0000000000000000
type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
guid: ee2d19c3-3c49-4732-b432-04b9351f17d7
8 0x00012222 0x00e8ffde "rootfs"
attrs: 0x0000000000000000
type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
guid: 6e8b3aaf-e5bc-4134-93b3-8e66c5e77dad
=> |
...
Upon execution, the system will process the update, indicating the maximum download size and confirming the successful transfer and writing of the u-boot image to the 'uboot2' partition. This process is analogous when updating the kernel or rootfs.
Fastboot
...
Over Ethernet
Enable UDP support
Enabling Fastboot over UDP Ethernet provides an alternative and efficient means of updating system images. Follow the steps below to activate UDP support and perform image updates using U-Boot and Minimal ADB and Fastboot on a Windows computerTo use the fastboot over Ethernet interface, please follow the following steps.
Enable UDP Support
To use fastboot over Ethernet, we need to enable “Enable fastboot protocol over UDP” in U-Boot. If it is not enabled, please enable it.
Navigate to the Device Drivers > Fastboot support under U-Boot menuconfig.
Select "Enable fastboot protocol over UDP" as shown below:
...
...
Reference to the previous section “Update USB download gadget driver in the Windows computer.”
Install Minimal ADB and Fastboot on Windows
...
Computer
Reference to the previous section “Install Minimal ADB and Fastboot on Windows computer.”
Configure
...
Network Settings
To establish a connection between the SP7350 and the Windows computer via the network. Configure Ethernet, please configure the Network Interface Card (NIC) settings for both devices.
The SP7350 NIC configuration is outlined below:
| Code Block |
|---|
=> setenv ipaddr 192.168.0.50 => setenv netmask 255.255.255.0 => setenv ethact eth0 |
Flash images
In U-Boot on the SP7350, Please also configure your Windows computer.
Establish UDP Connection for Fastboot
To establish a UDP connection of fastboot between your SP7350 platform and a Windows computer, please execute the following command to enable Fastboot over UDP:
| Code Block |
|---|
=> fastboot udp |
Flash Images
In the Windows Command Prompt, use the following command to update the x-boot image. Note that the process for updating u-boot, kernel, or rootfs is analogous:
...