Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Symbol

Parameter

Conditions

MIN.

Typ.

MAX.

Unit

TMDSTX Specification

AVcc

Termination Supply Voltage

3.135

3.465

V

RT

Termination Resistance

4.5

5.5

VOFF

Single-ended standby(off) output voltage

AVcc-10mV

AVcc+10mV

V

Vswing

Single-ended output swing voltage

400

600

mV

VH

Single-ended high level output voltage

Attached Sink supports <= 165MHz

AVcc-10mV

AVcc+10mV

V

Attached Sink supports > 165MHz

AVcc-200mV

AVcc+10mV

V

VH

Single-ended low level output voltage

Attached Sink supports <= 165MHz

AVcc-600mV

AVcc-400mV

V

Attached Sink supports > 165MHz

AVcc-700mV

AVcc-400mV

V

MIPI Basic Specification

AVDD

Analog operation Voltage

1.08

1.2

1.32

V

VDD

Core operation voltage

1.08

1.2

1.32

V

Temp

Operating temperature range

-40

125

TStart

Power up/Power down time

1.08

20

uS

MIPI HS Mode

VCMRX(DC)

Common-mode voltage HS receive mode

70

330

mV

VIDTH

Differential input high threshold

70

mV

VIDTL

Differential input low threshold

-70

mV

VIHHS

Single-ended input high voltage

460

mV

VILHS

Single-ended input low voltage

-40

mV

VOD

Differential voltage swing

70

mV

FCLK

Operating frequency

80

750

MHz

VTERM-EN

Single-ended threshold for HS termination enable

450

mV

ZID

Differential input impedance

80

100

125

MIPI LP Mode

VIH

Logic 1 input voltage

880

mV

VIL

Logic 0 input voltage, not in ULP State

550

mV

VIL-ULPS

Logic 0 input voltage, ULP State

300

mV

VHYST

Input hysteresis

25

mV

GPIO

VIL

Input Low Voltage

-0.3

0.8

V

VIH

Input High Voltage

2

5.5

V

VOL

Output Low Voltage

0.4

V

VOH

Output High Voltage

2.4

V

IOL

Low Output Current @ VOL (max) (Port 1 ~ 8)

08:08mA

9.4

14.8

19.8

mA

IOL 1

Low Output Current @ VOL (max) (Port 0)

16:16mA

18.9

29.5

39.6

mA

IOH

High Output Current @ VOL (min) (Port 1 ~ 8)

08:08mA

14.0

28.7

48.2

mA

IOH 1

High Output Current @ VOL (min) (Port 0)

16:16mA

27.2

55.6

93.4

mA

Power Specification

Supply current @ SYSCLK = 202 MHz / Ram Test @ 25’c

Power Saving

mA

I09

0.9V supply current

265

865

mA

I12

1.2V supply current

1075

1700

mA

I15

1.5V supply current

170

200

mA

I33

3.3V supply current

73

mA

PD

Power dissipation

202MHz

2024

mW

Ps

Standby mode

AO33V@32.768KHz

3.00

mW

Pu

Ultra Low Standby mode

AO33V@32.768KHz

1.75

mW

...