SNNF demo is an example based on SNNF V1.0.0 that can easily display the detection results of different NN model. It can quickly switch between different NN model through the menu, and then display the real-time images and detection results on the screen. The display supports connections through MIPI and HDMI, and can adapt to screens of different resolutions.

Currently supported NN model:

• Pose （yolov8n_pose_opti）

• Segment （yolov8n_segment_opti）

• Object detection （yolov8n_detection_opti）

• Face Match （det_10g + w600k_r50）

UI

Click the screen to pop up the menu.

Model

Pose

Segment

Object Detection

Face Match

How to Add a Face

1. Before Adding a Face：

   

2. Adding a Face：

Double-click on the face (the click must be within the face frame for it to be valid). Enter the person's name in the pop-up window as shown below, click OK, and the face will be added.

3. After Adding a Face：

Once added, the face can be recognized in real-time.

How to switch between MIPI and HDMI displays

Switch to MIPI

Set the jump cap in the above figure to the ON state and unplug the HDMI cable

Switch to HDMI

Set the jump cap in the above figure to OFF, power off the Panel connected to MIPI, and plug in the HDMI cable;