2.9 Plus1 7021 Platform development code burning and curing

When the debugging of the project program is completed, the next step is to burn and burn the code：

1) First enter the out subdirectory under the installation directory of SP7021 IDE, copy ISPBOOOT.BIN to the U disk

2: Set the working mode of the platform to burning and curing mode, and press the position of the dial switch

3: Insert the U disk into the USB socket of the platform, as shown below

The yellow frame is the location of the USB socket. There are two sockets, the bottom is the USB0 socket, the top is the USB1 socket, and the U disk can be inserted into either one

4:After the platform is powered on, the programming information can be displayed in the SP7021 IDE Terminal window as follows