Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

The goal of the document is to illustrate how to enable and use watchdog of SP7021.

...

Run make kconfig command in project top folder, or go to linux/kernel folder and run make menuconfig command. When “Linux/arm 5.4.35 Kernel Configuration” menu pops up, please use arrow key to move cursor down to “Device Drivers”. Refer to screenshot below, cursor is moved to “Device Drivers”:

...

Refer to the following C example code of watchdog setup and feeding application. The application setups, starts, and then feeds watchdog every 12 seconds. The maximum time-out time of watchdog of SP7021 have no limit.

watchdog.c

Code Block
languagenone
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <pthread.h>
#include <sys/ioctl.h>

#define	WATCHDOG_IOCTL_BASE	'W'

#define	WDIOC_SETOPTIONS	_IOR(WATCHDOG_IOCTL_BASE, 4, int)
#define	WDIOC_KEEPALIVE		_IOR(WATCHDOG_IOCTL_BASE, 5, int)
#define	WDIOC_SETTIMEOUT    _IOWR(WATCHDOG_IOCTL_BASE, 6, int)

#define WDIOS_DISABLECARD   1
#define	WDIOS_ENABLECARD	2

#define	WDIOC_GETTIMELEFT	_IOR(WATCHDOG_IOCTL_BASE, 10, int)

int ret;
int wd_fd;
volatile int wd_feed_time = 12;	// Feed watchdog every 12 second by default.
int wd_timeout = 15;			// Timeout time of watchdog. Reset event occurs if watchdog is not fed within this time.

/* a thread feed dog */
void *feedwdt_thd()
{
    while(1) {
        // Feed (reset) watchdog.
        ret = ioctl(wd_fd, WDIOC_KEEPALIVE, 0);
        if (ret != 0) {
            printf("Feed watchdog failed. \n");
            close(wd_fd);
        } else {
            printf("Feed watchdog every %d seconds.\n", wd_feed_time);
        }

        sleep(wd_feed_time);
    }
}

/* a thread read counter and print the value */
void *readwdt_thd()
{
    int arg;
    int i;

    while(1)
    {
        ret = ioctl(wd_fd, WDIOC_GETTIMELEFT, &arg);
        if (ret != 0) {
            printf("get data failed. \n");
        }
        printf("cnt value is 0x%x\n", arg);
        usleep(200000);
    }
}

int main(void)
{
    pthread_t wd_feed_thread;
    pthread_t wd_read_thread;

    int wd_option;
    char str[10];
    int num = 0;
    char* ptr = str;

    // Get file handle of watchdog device.
    wd_fd = open("/dev/watchdog0", O_WRONLY);
    if (wd_fd == -1) {
        perror("watchdog");
        exit(EXIT_FAILURE);
    }

    // Enable wacthdog.
    wd_option = WDIOS_ENABLECARD;
    ret = ioctl(wd_fd, WDIOC_SETOPTIONS, &wd_option);
    if (ret != 0) {
        printf("Failed to start watchdog!\n");
        close(wd_fd);
        return -1;
    }

    // Setup timeout time.
    ret = ioctl(wd_fd, WDIOC_SETTIMEOUT, &wd_timeout);
    if (ret != 0) {
        printf("Failed to set timeout time!n");
        close(wd_fd);
        return -1;
    } 

    // Create a thread for feeding watchdog.
    ret = pthread_create(&wd_feed_thread, NULL, feedwdt_thd, NULL);
    if (ret < 0)
        printf("Failed to create feeddog thread!\n");
#if 0 
    // Create a thread for reading and printing counter value.
    ret = pthread_create(&wd_read_thread, NULL, readwdt_thd, NULL);
    if (ret < 0)
        printf("Failed to create read counter thread!\n");
#endif
    while(1) {
        printf("Press 'e' to disable watchdog and exit.\n");
        printf("Enter a number for new feed time (current feed time is %d seconds, timeout time is %d seconds):\n", wd_feed_time, wd_timeout);
        scanf("%s", str);
        //printf("debug why feedtime invarible  %s\n",str);

        if (!strcmp(str,"e")) {
            wd_option = WDIOS_DISABLECARD;
            ret = ioctl(wd_fd, WDIOC_SETOPTIONS, &wd_option);
            if (ret != 0) {
                printf("Failed to stop watchdog!\n");
            }
            printf("Disabled watchdog!\n");
            close(wd_fd);
            break;
        }
        if (strspn(str, "0123456789") == strlen(str)) {
            // Get new feed time.
            num = atoi(str);
            if (num > 0) {
                wd_feed_time = num;
            } else {
                printf("Feed time can not be zero!\n");
            }
        } else {
            printf("Invalid feed time!\n");
        }
    }
    return 0;
}

...