Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Open Kernel Configuration window and select "Device Drivers" item. Pressush Press "enter" to come in next layer window, then user can enable the wanted drivers which onehe wants. Figure 5 shows the Kernel Configuration window with Device Drivers item. Image Removed

Image Added
Figure 5. Device Drivers item.

4.1 General purpose IO (GPIO)

  • The Linux configuration option for GPIO can be found in the following path.

Device

...

Drivers →

...

   <*> Pin

...

controllers →

      <*>

...

Sunplus SP7021 pinmux and gpio driver

Input Capture Module (ICM)

  • The Linux configuration option for ICM can be found in the following path.

Device Drivers 
<*> Misc devices 
<*> Sunplus Input Capture (ICM) driver

SPI

  • The Linux configuration option for SPI can be found in the following path.

Device Drivers 
<*> SPI support 
<*> Sunplus SPI master controller
<*> User mode SPI device driver support

SPI NOR FLASH

  • The Linux configuration option for SPI NOR FLASH can be found in the following path.

Device Drivers 
<*> Memory Technology device (MTD) support 
<*> OpenFirmware partitioning Information support
<*> Caching block device access to MTD device
<*> SPI-NOR device support 
<*> Sunplus SPI nor controller

SPI NAND FLASH

  • The Linux configuration option for SPI NAND FLASH can be found in the following path.

Device Drivers 
<*> Memory Technology device (MTD) support 
<*> NAND Device Support 
<*> Support for SPI NAND controller on SUNPLUS SoCs

UART

  • The Linux configuration option for UART can be found in the following path.

Device Drivers 
<*> Character device 
<*> Serial drivers 
<*> Sunplus UART serial port support

I2C

  • The Linux configuration option for I2C can be found in the following path.

Device Drivers 
<*> I2C support 
<*> I2C device interface
I2C Hardware Bus support 
<*> SP I2C support

SD CARD

  • The Linux configuration option for SD CARD can be found in the following path.

Device Drivers 
<*> MMC/SD/SDIO card support 
<*> Sunplus Gemini SoC SD Host Controller support

USB

  • The Linux configuration option for USB can be found in the following path.

Device Drivers 
<*> USB support 
<*> EHCI HCD (USB 2.0) support
<*> OHCI HCD (USB 1.1) support
<*> USB Gadget Support 
<*> USB Peripheral Controller 
<*> Sunplus Gemini USB Device Controller

ETHERNET SWITCH

  • The Linux configuration option for ETHERNET SWITCH can be found in the following path.

...

Device Drivers 
<*> Network device support 
<*> Ethernet driver support 
<*> Sunplus devices
Selected Mode(Dual NIC Mode) 
( ) An NIC with Daisy-Chain Mode
(star) Dual NIC Mode
( ) An NIC with Daisy-Chain Mode2

AUDIO

  • The Linux configuration option for AUDIO can be found in the following path.

Device Drivers 
<*> Sound card support 
<*> Advanced Linux Sound Architecture 
<*> ALSA for SoC audio support 
<*> ASoc support for Sunplus

MIPICSI

  • The Linux configuration option for MIPICSI can be found in the following path.

...

Device Drivers 
<*> Multimedia support 
<*> Sunplus Video Sensor Support 
<*> Video Sensor (OV9281) Driver

HDMITX

  • The Linux configuration option for HDMITX can be found in the following path.

Device Drivers 
<*> Multimedia support 
<*> V4L platform devices 
<*> SUNPLUS HDMITX driver

DISPLAY

  • The Linux configuration option for DISPLAY can be found in the following path.

Device Drivers 
<*> Multimedia support 
<*> V4L platform devices 
<*> SUNPLUS DISPLAY driver

FRAMEBUFFER

  • The Linux configuration option for FRAMEBUFFER can be found in the following path.

Device Drivers 
<*> Graphic support 
<*> Frame buffer Devices 
<*> SP7021Graphics Backend framebuffer support

MAILBOX

  • The Linux configuration option for MAILBOX can be found in the following path.

Device Drivers 
<*> Misc devices 
<*> Sunplus Mailbox(IPC) driver

IOP (8051)

  • The Linux configuration option for IOP (8051) can be found in the following path.

Device Drivers 
<*> Misc devices 
<*> IOP support 
<*> IOP support

CRYPTO ENGINE

  • The Linux configuration option for CRYPTO ENGINE can be found in the following path.

...