...
Symbol | Parameter | MIN. | MAX. | Unit |
---|---|---|---|---|
VDVD33, VVDD33_AO | Supply voltage 3.3V | -0.3 | 3.45 | V |
VDVDD15 | Supply voltage 1.5V, DDR3_VDDQ | -0.075 | 1.575 | V |
VCVDD12 | Supply voltage 1.2V | -0.12 | 1.32 | V |
VCVDD09 | Supply voltage 0.9V | -0.045 | 1 | V |
VO | Output voltage | -0.3 | VDVD33 + 0.3 | V |
Vi | Input voltage (non 5V tolerant inputs) | -0.3 | VDVD33 + 0.3 | V |
Vi5vtol | Input voltage (5V tolerant inputs) | -0.3 | 5.5 | V |
TJ-MAX | Junction temperature | 125 | °C | |
TSTG | Storage temperature | -55 | 150 | °C |
TSOL | Lead temperature (soldering, 4 sec) | 260 | °C |
Note:
8.2. Thermal Information
Symbol | Parameter | Unit(°C/W) |
---|---|---|
JA | Thermal resistance, junction to ambient(4 Layer PCB), Ambient 85°C | 17.66 |
CJT | Junction-to-top characterization parameter | 1.63 |
...
Symbol | Parameter | Value | Unit |
---|---|---|---|
VESD | Human Body Model (test Per JESD22-A114F, Class 2) | 2 | KV |
Charge Device Model (test per JESD22-C101E, Class III) | 500 | V | |
ILA | Latch-up tolerance (test Per JESD78C, Class I) | 100 | mA |
Note 1:
8.4. DC Operating Conditions
...
Symbol | Parameter | Conditions | MIN. | Typ. | MAX. | Unit |
---|---|---|---|---|---|---|
TMDSTX Specification | ||||||
AVcc | Termination Supply Voltage | 3.135 | 3.465 | V | ||
RT | Termination Resistance | 4.5 | 5.5 | Ω | ||
VOFF | Single-ended standby(off) output voltage | AVcc-10mV | AVcc+10mV | V | ||
Vswing | Single-ended output swing voltage | 400 | 600 | mV | ||
VH | Single-ended high level output voltage | Attached Sink supports <= 165MHz | AVcc-10mV | AVcc+10mV | V | |
Attached Sink supports > 165MHz | AVcc-200mV | AVcc+10mV | V | |||
VH | Single-ended low level output voltage | Attached Sink supports <= 165MHz | AVcc-600mV | AVcc-400mV | V | |
Attached Sink supports > 165MHz | AVcc-700mV | AVcc-400mV | V | |||
MIPI Basic Specification | ||||||
AVDD | Analog operation Voltage | 1.08 | 1.2 | 1.32 | V | |
VDD | Core operation voltage | 1.08 | 1.2 | 1.32 | V | |
Temp | Operating temperature range | -40 | 125 | ℃ | ||
TStart | Power up/Power down time | 1.08 | 20 | uS | ||
MIPI HS Mode | ||||||
VCMRX(DC) | Common-mode voltage HS receive mode | 70 | 330 | mV | ||
VIDTH | Differential input high threshold | 70 | mV | |||
VIDTL | Differential input low threshold | -70 | mV | |||
VIHHS | Single-ended input high voltage | 460 | mV | |||
VILHS | Single-ended input low voltage | -40 | mV | |||
VOD | Differential voltage swing | 70 | mV | |||
FCLK | Operating frequency | 80 | 750 | MHz | ||
VTERM-EN | Single-ended threshold for HS termination enable | 450 | mV | |||
ZID | Differential input impedance | 80 | 100 | 125 | Ω | |
MIPI LP Mode | ||||||
VIH | Logic 1 input voltage | 880 | mV | |||
VIL | Logic 0 input voltage, not in ULP State | 550 | mV | |||
VIL-ULPS | Logic 0 input voltage, ULP State | 300 | mV | |||
VHYST | Input hysteresis | 25 | mV | |||
GPIO | ||||||
VIL | Input Low Voltage | -0.3 | 0.8 | V | ||
VIH | Input High Voltage | 2 | 5.5 | V | ||
VOL | Output Low Voltage | 0.4 | V | |||
VOH | Output High Voltage | 2.4 | V | |||
IOL | Low Output Current @ VOL (max) (Port 1 ~ 8) | 08:08mA | 9.4 | 14.8 | 19.8 | mA |
IOL 1 | Low Output Current @ VOL (max) (Port 0) | 16:16mA | 18.9 | 29.5 | 39.6 | mA |
IOH | High Output Current @ VOL (min) (Port 1 ~ 8) | 08:08mA | 14.0 | 28.7 | 48.2 | mA |
IOH 1 | High Output Current @ VOL (min) (Port 0) | 16:16mA | 27.2 | 55.6 | 93.4 | mA |
Power Specification | ||||||
Supply current @ SYSCLK = 202 MHz / Ram Test @ 25’c Power Saving | mA | |||||
I09 | 0.9V supply current | 265 | mA | |||
I12 | 1.2V supply current | 1075 | 1700 | mA | ||
I15 | 1.5V supply current | 170 | mA | |||
I33 | 3.3V supply current | 73 | mA | |||
PD | Power dissipation | 202MHz | 2024 | mW | ||
Ps | Standby mode | AO33V@32.768KHz | 3.00 | mW | ||
Pu | Ultra Low Standby mode | AO33V@32.768KHz | 1.75 | mW |
PS. Note: the maximum current of 1.2V power is about 1700mA in worst case (FF, 90 degree Celsius).
...