Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Open Kernel Configuration Window and select "Device Drivers" item. Press "enter" to come in next layer window, then user can enable the wanted drivers. Figure 5 shows the Kernel Configuration Window with Device Drivers item.


Figure 5. Device Drivers item.

4.1 General purpose IO (GPIO)

  • The Linux configuration option for GPIO can be found in the following path.

Device Drivers ->

   <*> Pin controllers ->

      <*> Sunplus SP7021 pinmux and gpio driver

4.2 Input Capture Module (ICM)

  • The Linux configuration option for ICM can be found in the following path.
Device Drivers ->
   <*> Misc devices ->
      <*> Sunplus Input Capture (ICM) driver

4.3 SPI

  • The Linux configuration option for SPI can be found in the following path.
Device Drivers ->
   <*> SPI support ->
      <*> Sunplus SPI master controller
      <*> User mode SPI device driver support

4.4 SPI NOR FLASH

  • The Linux configuration option for SPI NOR FLASH can be found in the following path.
Device Drivers ->
   <*> Memory Technology device (MTD) support ->
      <*> OpenFirmware partitioning Information support
      <*> Caching block device access to MTD device
      <*> SPI-NOR device support ->
         <*> Sunplus SPI nor controller

4.5 SPI NAND FLASH

  • The Linux configuration option for SPI NAND FLASH can be found in the following path.
Device Drivers ->
   <*> Memory Technology device (MTD) support ->
      <*> NAND Device Support ->
         <*> Support for SPI NAND controller on SUNPLUS SoCs

4.6 UART

  • The Linux configuration option for UART can be found in the following path.
Device Drivers ->
   <*> Character device ->
      <*> Serial drivers ->
         <*> Sunplus UART serial port support

4.7 I2C

  • The Linux configuration option for I2C can be found in the following path.
Device Drivers ->
   <*> I2C support ->
      <*> I2C device interface
      I2C Hardware Bus support ->
         <*> SP I2C support

4.8 SD CARD

  • The Linux configuration option for SD CARD can be found in the following path.
Device Drivers ->
   <*> MMC/SD/SDIO card support ->
      <*> Sunplus Gemini SoC SD Host Controller support

4.9 USB

  • The Linux configuration option for USB can be found in the following path.
Device Drivers ->
   <*> USB support ->
      <*> EHCI HCD (USB 2.0) support
      <*> OHCI HCD (USB 1.1) support
      <*> USB Gadget Support ->
         <*> USB Peripheral Controller ->
            <*> Sunplus Gemini USB Device Controller

4.10 ETHERNET SWITCH

  • The Linux configuration option for ETHERNET SWITCH can be found in the following path.
Device Drivers ->
   <*> Network device support ->
      <*> Ethernet driver support ->
         <*> Sunplus devices
  • Mode select (For example: Dual NIC Mode)
Device Drivers ->
   <*> Network device support ->
      <*> Ethernet driver support ->
         <*> Sunplus devices
            Selected Mode(Dual NIC Mode) ->
              ( ) An NIC with Daisy-Chain Mode
              (star) Dual NIC Mode
              ( ) An NIC with Daisy-Chain Mode2

4.11 AUDIO

  • The Linux configuration option for AUDIO can be found in the following path.
Device Drivers ->
   <*> Sound card support ->
      <*> Advanced Linux Sound Architecture ->
         <*> ALSA for SoC audio support ->
            <*> ASoc support for Sunplus

4.12 MIPICSI

  • The Linux configuration option for MIPICSI can be found in the following path.

Device Drivers 
<*> Multimedia support 
<*> Sunplus MIPI/CSI-RX Driver

  • If input device is communication by I2C interface (Example: OV9281), user must enable I2C driver also.

Device Drivers 
<*> I2C support 
<*> I2C device interface
I2C Hardware Bus support 
<*> SP I2C support

  • To enable image sensor driver (Example: OV9281), please select driver as below.

Device Drivers 
<*> Multimedia support 
<*> Sunplus Video Sensor Support 
<*> Video Sensor (OV9281) Driver

HDMITX

  • The Linux configuration option for HDMITX can be found in the following path.

Device Drivers 
<*> Multimedia support 
<*> V4L platform devices 
<*> SUNPLUS HDMITX driver

DISPLAY

  • The Linux configuration option for DISPLAY can be found in the following path.

Device Drivers 
<*> Multimedia support 
<*> V4L platform devices 
<*> SUNPLUS DISPLAY driver

FRAMEBUFFER

  • The Linux configuration option for FRAMEBUFFER can be found in the following path.

Device Drivers 
<*> Graphic support 
<*> Frame buffer Devices 
<*> SP7021Graphics Backend framebuffer support

MAILBOX

  • The Linux configuration option for MAILBOX can be found in the following path.

Device Drivers 
<*> Misc devices 
<*> Sunplus Mailbox(IPC) driver

IOP (8051)

  • The Linux configuration option for IOP (8051) can be found in the following path.

Device Drivers 
<*> Misc devices 
<*> IOP support 
<*> IOP support

CRYPTO ENGINE

  • The Linux configuration option for CRYPTO ENGINE can be found in the following path.

Cryptographic API 
<*> Hardware crypto devices 
<*> Sunplus Crypto Engine












  • No labels