Software Package of SP7350 Mini Control Board (MCB)

Owned by Wells Lu
Last updated: about 6 hours ago
2 min read

Source Code

The source code for the SP7350 is available on both GitHub and Gitee:

For instructions on downloading and compiling the code, please refer to:

A Guide to Downloading and Compiling SP7350 Code

When prompted during the code building process, select “[3] SP7350 MC Board.”

 

Refer to In-system Programming Flash Devices if you write image into eMMC device and boot from it.

Refer to the release details of the software package: Releases

Prebuilt Images

  1. Ubuntu Server 24.04.1 SD card image (2024-11-21)

  2. Ubuntu XFCE 24.04.1 SD card image (2024-11-21)

To create an SD card for booting SP7350 IO Boards, start by downloading the prebuilt image file, such as Ubuntu_Server_24_04_1_for_MCB_20241121.7z and unzip it. Once ready, write the image directly to the SD card using the dd command. For example:

dd if=Ubuntu_Server_24_04_1_for_MCB_20241121.img of=/dev/sda bs=1M; sync

Here, the SD card is accessed via a USB SD card reader and mounted at /dev/sda. Depending on your system, unmounting the SD card might be required after the writing process is complete.

umount /dev/sda

To boot from the SD card, set the boot switch to [1 1 0 0] as shown in the diagram below:

image-20240731-114203.png
Boot Switch Configuration for SD Card Boot

Insert the prepared SD card into the micro SD card socket, as illustrated in the figure below.

image-20240731-113907.png
Micro SD Card and Socket

Finally, power on the system, which will automatically boot from the SD card.

References

  1. SP7350 Hardware

  2. SP7350 Software

  3. SP7350 NPU

  4. SP7350 MIPI-RX and Camera

  5. SP7350 Audio and Video Streaming

  6. SP7350 Application Notes